@stuartl@mastodon.longlandclan.id.au
2025-08-03 12:07 UTC
@kenshirriff
> Moreover, FM radio provides stereo, while AM radio is mono, but this is due to the implementation of radio stations, not a fundamental characteristic of FM versus AM.
They did try stereo with AM. One method used was Independent Sideband modulation, something like running two SSB stations, the LSB station carrying the left channel and the USB carrying the right … a DSB AM receiver will just get both sidebands mixed together (mono) but a ISB-capable receiver will detect the individual sidebands and receive them separately. This requires very sharp filters which get pricey.
The other way, was Motorola's C-QUAM. Basically it used Quadrature Ampitude Modulation: it relied on the fact that a conventional AM receiver would not detect phase… but using two AM detectors, with reference oscillators with a 90° phase difference, could detect the in-phase (I) amplitude, and the quadrature (Q) amplitude independently.
So I was effectively the mono signal (left + right), and Q contained the differential (left - right). There was some signal processing to the Q signal to ensure it didn't interfere with the I signal.
This was tried here in Australia, but apparently was not that successful, and quickly disappeared once FM stations started appearing in the 1980s (about the time they moved AM stations to a 9kHz separation to make room for stations that would never exist).
https://en.wikipedia.org/wiki/C-QUAM
Replies (0)
No replies.